All Products
Keywords [ force measurement ] match 389 Products.
Thermoplastic Material ASTM F1921 Hot Tack Tester And Tensile Tester For Plastic Packaging ASTM F2029 Seal Strength Test
| Sealing Temp.: | Ambient~250℃ |
|---|---|
| Temp Accuracy: | ±0.2℃ |
| Dwell Time: | 0.1~9999s(Hot Tack ) |
COF Tester To Detect Static Friction Coefficient Inclined Plane For Aluminum Plastic Composite Film
| Angle Range: | 0° ~ 60° |
|---|---|
| Accuracy: | 0.01° |
| Stroke: | 0.1°/s ～ 10.0°/s |
ST-01 Smoothness Tester For Paper Bekk Testing Method To Detect Printed Surface ISO 5627 Best Board Tester Of Smoothness
| Test Area: | (10±0.05) Cm² |
|---|---|
| Measuring Range: | （1-9999）S, (1-15)S, (15～300) S, (300～9999) S, Three Range Switch |
| Volume: | Big Vacuum 380±1ml; Small Vacuum (38±1) Ml |
Impact Tester For Plastic Sheet Free Falling Ball High Weight Impact Testing Equipment
| Impact Height: | 300mm-600mm (can Be Extended) |
|---|---|
| Ball Diameters(mm): | 23, 25, 28.6, 38.1, 50.8(one Equipped) |
| Accuracy: | 0.1g (0.1J) |
High Accuracy Hot Seal Tack Tester For Plastic ASTM F1921 Polyester Film Hot Seal Strength Tester With High Efficiency
| Sealing Temp.: | Ambient~250℃ |
|---|---|
| Temp Accuracy: | ±0.2℃ |
| Dwell Time: | 0.1~9999s(Hot Tack ) |
ASTM F2029 Hot Tack Testing Equipment For Medical Packaging Heat Seal Strength Tester And Composite Film Tensile Tester
| Sealing Temp.: | Ambient~250℃ |
|---|---|
| Temp Accuracy: | ±0.2℃ |
| Dwell Time: | 0.1~9999s(Hot Tack ) |
Impact Tester By Pendulum Hammer Striking Testing Method For Electrical Products IEC 60068
| Impact Energy: | 0.14J, 0.2J, 0.35J, 0.5J, 0.7J, 1J, 2J, 5J |
|---|---|
| Equivalent Mass: | 0.25,0.25,0.25,0.25,0.25, 0.25,0.5,1.7kg |
| Height Of Fall: | 56,80,140,200,280,400,400,300mm |
Physical Performance Testing Machine For Medical Strip Packaging Medical Device Inner Packaging Tensile Tester
| Test Range: | 500N (or As Required) |
|---|---|
| Stroke: | 200mm (without Clamp) |
| Test Speed: | 1~500mm/min |
Packaging Metal Foil Friction Tester Friction Test Equipment For Rubber Material ASTM D1894 Slip Tester
| Load Cell: | 5 N(or As Required) |
|---|---|
| Accuracy: | 0.5 F.S. |
| Sled: | 200±1g (or As Required) |
Mop Head Coefficient Of Friction Tester Sliding Performance testing for Textile material ASTM D1894 Customized COF teste
| Force Range: | 100N |
|---|---|
| Resolution: | 0.5%FS |
| Speed Adjustable: | 1~1000mm/min |