All Products
Keywords [ laboratory ] match 394 Products.
ASTM D4974 Yarn And Cord Thermal Shrinkage Force Tester Hot Air Thermal Shrink Rate Tester For Tire Cord
| Conditions Of Use: | -10～+40℃, RH: 45%～85%, No Vibration |
|---|---|
| Temperature Range And Accuracy: | Ambient~250°C; ±0.1°C |
| Shrinkage Resolution: | 0.01% (100% Is 250mm) |
Softness Tester Paper Softness Testing Instrument Best Hand-Feeling Softness Meter For Paper
| Test Range: | (10~1000) MN |
|---|---|
| Test Blade Size: | R. Mm, 120mm*2mm L*D |
| Blade Stroke: | 8±0.5mm |
Air Permeance Tester ISO 5636 Breathability Testing Instrument For Paper And Fabric
| Test Range: | 1～1000）ml/min Or 0~17um/(Pa.s) |
|---|---|
| Area: | 10±0.2cm² |
| Test Area Pressure Difference: | 1±0.01kpa |
WTD-02 Taber Stiffness Tester Bending And Stiffness Testing Equipment for Resistance to Bending of Paper and Paperboard
| Test Range: | 1~500 MN.m (in 7 Ranges) |
|---|---|
| Bending Length: | 50mm±0.1mm |
| Testing Speed: | （200°±20°）/min |
Stable And High Temp Heat Shrink Tester For Flexible Heat Shrink Fillm Polyolefin Film Heat Shrink Force Testing Machine
| Force Range: | 5 N ( Or As Required) |
|---|---|
| Accuracy: | ±0.5°C |
| Resolution: | 0.001N |
ASTM F2029 High Efficiency Heat Sealer For Plastic Film With Mult-Station Lidding Film Pack Heat Sealing Testing Machine
| Sealing Temp.: | Ambient~250℃ |
|---|---|
| Temp. Gradient: | ≤20℃ |
| Deviation: | ±0.2℃ |
Gelbo Flex Testing Machine For Transparent Barrier Food Packaging Film ASTM F392 Lab Testing Equipment
| Flex Frequency: | 45 /minute |
|---|---|
| Flex Angle: | 440° (90 Mm) Or 400° (80 Mm) |
| Capacity: | 3.5 N.m |
Thickness Measuring System For Plastic Sheet And Paper ISO 534 Stable Paper And Board Contact Thickness Tester
| Test Range: | 0~2mm(Customization Available) |
|---|---|
| Resolution: | 0.1 μm |
| Standard Measure Head: | Hemispherical Type |
Tear Testing Instrument For Composite Flexible Packaging Film Elmendorf Tear Resistance Detection ASTM D1922 Stable Tear
| Pendulum Capacity(gf): | 200,400,800,1600,3200,6400 |
|---|---|
| Gas Source: | 0.6 MPa |
| Tearing Arm: | 104±1mm |
Electronic Verticality Deviation For Preform Verticality Detection Instrument ISO 9008 Perpendicularity Tester
| Sample Diameter: | 5mm-145mm (or As Required) |
|---|---|
| Test Rage: | 0-12.7mm (or As Required) |
| Division Value: | 0.01 Or 0.001mm(optional) |