All Products
Keywords [ package ] match 813 Products.
Paper Strength Tester About Bending Stiffness Detection Measuring Bending Resistance And Stiffness Of Paper And Board
| Test Range: | （0~10000）mN |
|---|---|
| Bending Length: | 5, 10, 15, 20, 25, 30, 40, 50 Mm |
| Bending Angle: | 1 °~ 90 ° |
WTD-02 Taber Stiffness Tester Bending And Stiffness Testing Equipment for Resistance to Bending of Paper and Paperboard
| Test Range: | 1~500 MN.m (in 7 Ranges) |
|---|---|
| Bending Length: | 50mm±0.1mm |
| Testing Speed: | （200°±20°）/min |
Coated Film Gelbo Flex Tester Quality Testing Equipment About ASTM F392 Gelbo Testing Method With Three Station
| Flex Frequency: | 45 /minute |
|---|---|
| Flex Angle: | 440° (90 Mm) Or 400° (80 Mm) |
| Capacity: | 3.5 N.m |
Heat Sealing Testing Machine By PID Control Heat Seal Film For Plastic Parameter Detection About Heat Sealing Performace
| Sealing Temp.: | Ambient~300℃ |
|---|---|
| Deviation: | ±0.2℃ |
| Sealing Time: | 0.1S~9999S |
Bopp Composite Film Heat Seal Parameter Detection Equipment For Sale Sealing Test Machine Low Price For Polyester Film
| Sealing Temp.: | Ambient~300℃ |
|---|---|
| Deviation: | ±0.2℃ |
| Sealing Time: | 0.1S~9999S |
ASTM F2029 High Efficiency Heat Sealer For Plastic Film With Mult-Station Lidding Film Pack Heat Sealing Testing Machine
| Sealing Temp.: | Ambient~250℃ |
|---|---|
| Temp. Gradient: | ≤20℃ |
| Deviation: | ±0.2℃ |
Thickness Measuring System For Plastic Sheet And Paper ISO 534 Stable Paper And Board Contact Thickness Tester
| Test Range: | 0~2mm(Customization Available) |
|---|---|
| Resolution: | 0.1 μm |
| Standard Measure Head: | Hemispherical Type |
Paper Beating Degree Detection Tester Pulp Drainage Speed Drainage Performance Testing for Pulp
| Measuring Range: | 1~100 SR |
|---|---|
| Division Value Of Measuring Cylinder: | 1 SR |
| Orifice Draining Time: | 149±1s |
Corrugated Base Paper Corrugator For Corrugated Core Flat Pressing And Corrugated Vertical Pressing Testing
| Depth Of Teeth: | 4.75+/-0.05mm |
|---|---|
| Distance Between Teeth: | 8.50 ± 0.05 Mm |
| Flute Type: | A (standard) |
Melt Flow Rate Testing Meter For Plastic And Resin In In Viscous Flow State
| Measuring Range(MFR): | 0.1-400.00g/10min |
|---|---|
| Temperature Range: | Ambient~450°C |
| Cylinder Internal Diameter: | 9.550mm ± 0.025mm |