ASTM F2096 internal pressurization bubble tester Positive pressure leakage tester Tyvek pack testing machine
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Pressure Decay Positive Pressure Method
ASTM F2096 PRESSURE DECAY LEAK TESTER tests sealing strength, heating sealing quality, burst pressure and leakage of flexible and aseptic packages. The Burst Tester can also be used to determine the sealing performance of pilfer-free bottle caps and soft tubes.
The compression strength, connection strength of cap and body, cap losing strength, seal strength and butting strength of tubes are also the applications.
It has three test modes
- Burst Test: internally pressurizes the packages until the package fails. The test pressure is the maximum pressure detected before the package fails.
- Creep Test: Pressurize the package internally to a specific pressure and maintains this pressure for a specific time. The test measure is pass/fail.
- Creep to Failure: The package is creep-tested and held until the package fails. The pressure setting is higher than that of the creep test to ensure the package fails in some time. The measure is the time until failure.
Technical Features of ASTM F2096 PRESSURE DECAY LEAK TESTER
- Three test modes of burst, creep and creep to failure are available
- PLC programmable logic controller realizes precise pressure and time control.
- 7 inch TFT touching screen for convenient parameter setting and test operation.
- Multiple groups of test parameters can be save to avoid the repetitive setting time.
- Test result auto statistics and storage.
- Dual test methods of restraint distension and unrestraint distension
- Program customization available.
- Test result keeping
- Multi units support
Burst Tester Technical Specifications
|0 ~ 600 KPa
|0.4 MPa~0.9 MPa
|Φ6 mm PU hose
|400 mm (L) × 270 mm (W) × 180 mm (H)
|375 mm (L) × 275 mm (W) × 345 mm (H)
Burst Tester Standards
ISO 11607-1, ISO 11607-2, ASTM F1140, ASTM F2054