Open package internal burst strength tester Internal pressurization burst tester
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
Three side seal,
fill and form
Open package internal burst strength tester conforms to standards of ISO 11607-1, ISO 11607-2, ASTM F1140, ASTM F2054.
Open package internal burst strength tester has three test modes.
- Burst Test: It internally pressurizes the packages until the package fails. The test pressure is the maximum pressure detected before the package fails.
- Creep Test: Pressurize the package internally to a specific pressure and maintains this pressure for a specific time. The test measure is pass/fail.
- Creep to Failure: The package is creep-tested and held until the package fails. The pressure setting is higher than that of the creep test to ensure the package fails in some time. The measure is the time until failure.
Open package internal burst strength tester features
- Three test modes of burst, creep and creep to failure are available.
- PLC programmable logic controller r
- 7 inch TFT touching screen operation.
- Multiple groups of test parameters can be save
- Test result auto statistics and storage.
- Program customization available.
Open package internal burst strength tester Technical Specifications
|Pressure Range||0~600 KPa|
|Beam Width||300mm(for open package)|
|Inflating Head||Φ4mm (Standard for sealed package)|
|Gas Pressure||0.4 MPa~0.9 MPa|
|Port Size||Φ6 mm PU hose|