All Products
Keywords [ leak test machine ] match 92 Products.
Peeling And Tensile Tester Hot Tack Polymer Test ASTM F1921
| Product Name: | Hot Tack Tester,Property Test For Plastic Film Hot Tack Tester |
|---|---|
| Seal Temperature: | Room Temperature~250 |
| Keyword: | Hot Tack Tester,hot Tack Testing Equipment |
ASTM F2029 Heat Seal Strength Test Heat Seal Tester For Flexible Barrier Film Packaging Tester About Heating Sealability
| Sealing Temp.: | Ambient~300℃ |
|---|---|
| Deviation: | ±0.2℃ |
| Sealing Time: | 0.1S~9999S |
Food Sealed Packaging Nondestructive Leak Tester By Vacuum Decay Method ASTM F2338 Medicine Packaging Sealed Performance
| Test Range: | 1Pa |
|---|---|
| Sensitivity: | 1~3μm |
| Chamber Size: | Made-On-Demand |
Leak And Seal Strength Detector Pressure Decay Burst Tester Creep To Failure Leakage Tester
| Power: | 110~220V |
|---|---|
| Standards: | ASTM F1140 ASTM F2054 |
| Packaging Details: | Plywood Carton |
Syringe Leak Tester Pre-Filled Syringes Leak Detector ISO 7886-1
| Test Range: | 0~-90KPa |
|---|---|
| Air Input: | 0.6~0.7 Mpa |
| Test Time: | 9999H |
Gelbo Test Method Equipment For High Barrier Flexible Packaging Material By ASTM F392
| Flex Frequency: | 45 /minute |
|---|---|
| Flex Angle: | 440° (90 Mm) Or 400° (80 Mm) |
| Capacity: | 3.5 N.m |
Needle Penetration And Drag Force Tester ISO 7864 Annex D Penetration And Drag Force Measurement For Needles Syringe Testing
| Loadcell: | 50N (or As Required) |
|---|---|
| Test Speed: | 1~500mm/min |
| Force Accuracy: | 0.5% F.S. |
Board Bursting Tester Corrugated Bursting Strength High Accurate Lab Bursting Testing Equipment
| Force Resolution: | 1/100000 |
|---|---|
| Data Analysis Sampling: | Sampling Frequency) 400 Times/second |
| Force Accuracy: | ±0.1% (20~100% Full Scale) |
THREE SIDE SEAL PACKAGE BURST TESTER ASTM F2096 INTERNAL PRESSURIZATION BUBBLE TESTING EQUIPMENT
| Standard: | Astm F1140 Astm F2096 Astm F2054 |
|---|---|
| Method: | Positive Pressure Internal Pressure Burst |
| MOQ: | 1 Set |
ASTM F2029 Lab Packaging Heat Sealer Mylar Film Seal Data Tester Heat Seal Strength Testing Equipment For Thermoplastic
| Sealing Temp.: | Ambient~300℃ |
|---|---|
| Deviation: | ±0.2℃ |
| Sealing Time: | 0.1S~9999S |